Redmi Note 13 Pro Plus Price in Pakistan 2026: HyperOS 3, Rs. 62,000 Resale and Why NFC Still Matters

Majid Khan
37 Min Read

The Redmi Note 13 Pro Plus price in Pakistan in November 2026 is roughly Rs. 62,000 for a clean 12GB/512GB unit and Rs. 68,000–99,000 for slightly used or box-packed PTA-approved stock.

>

  • Used benchmark: Rs. 62,000 for 12GB/512GB in excellent condition, based on an OLX Pakistan listing in Pakpattan observed in November 2026.
  • Launch bracket was above Rs. 130,000 in 2024, so the phone has shed more than half its value because successor launches reset the mid-range segment.
  • HyperOS 3 (Android 16) has reached the device, bringing HyperIsland, Gemini integration and incremental patches such as build 3.0.301.0 at about 0.91 GB.
  • NFC is now a practical feature in Pakistan, not a dead spec, because JazzCash Tap-to-Pay and NayaPay contactless run on expanding NFC-capable POS terminals.
  • Hardware still holds up: Dimensity 7200-Ultra, 200MP OIS camera, IP68 and 120W HyperCharge that fills the 5,000mAh battery in about 19 minutes.

Introduction

As of November 2026, the Redmi Note 13 Pro Plus price in Pakistan sits near Rs. 62,000 for a top-tier 12GB/512GB unit in excellent condition on the used market — a long way down from a launch bracket that regularly exceeded Rs. 130,000 for brand-new top variants in 2024. That is the headline number, and it is dated deliberately, because used-market pricing in Pakistan moves week to week.

The collapse happened because two successor generations reset segment expectations, which means a 2024 phone carrying a MediaTek Dimensity 7200-Ultra, a 200MP OIS main camera, an IP68 rating and 120W HyperCharge now trades for entry-level money. Two things also changed in the device’s favour since launch: Xiaomi pushed HyperOS 3 to it, and NFC stopped being a decorative line on the spec sheet in this market.

This article gives you a dated price table by variant and city, the depreciation curve, the HyperOS 3 change log and install steps, an NFC payments walkthrough, a seven-point used-buying checklist and a five-device comparison — the kind of local-first breakdown we run across The Verge PK technology coverage.

About this analysis: Prices in this article were compiled from publicly visible asking prices on OLX Pakistan and Pakistani retailer listings observed between 10 and 16 November 2026. Specifications reflect Xiaomi’s published figures for the Redmi Note 13 Pro+ 5G. Software details reflect the 2026 HyperOS 3 global rollout.

Transparency note: The Verge PK did not receive a review unit, payment or editorial input from Xiaomi, Jazz, NayaPay or any retailer named here. Classified listing prices are self-reported by sellers and are asking prices, not audited transaction records.

Redmi Note 13 Pro Plus price in Pakistan: the November 2026 numbers

The Redmi Note 13 Pro Plus price in Pakistan in November 2026 runs from roughly Rs. 62,000 for an excellent-condition 12GB/512GB used unit to about Rs. 99,000 for box-packed PTA-approved stock held by dealers. The device is no longer sold new through official Xiaomi retail channels here, which means almost every available unit is either second-hand, dealer-held old inventory or imported grey stock — and that structure is exactly why the spread is so wide.

Variant Condition PTA status City / source Price (PKR)
12GB / 512GB Excellent used PTA approved Pakpattan (OLX) 62,000
12GB / 256GB Good used PTA approved Lahore 68,000–75,000
8GB / 256GB Good used PTA approved Karachi 62,000–70,000
12GB / 512GB Slightly used PTA approved Gujranwala 75,000–85,000
12GB / 512GB Box-packed PTA approved Lahore dealer up to 99,000
8GB / 256GB Used Non-PTA / tax due Mixed listings Below 62,000

Four variables drive that spread: PTA approval status, the storage variant, whether the original box and 120W charger are included, and the city. Lahore and Gujranwala listings sit at the top of the band because dealer-held box-packed inventory concentrates in those wholesale markets, and dealers price for margin rather than a quick exit. Smaller-city private sellers — the Pakpattan listing being the clearest example — price lower because their buyer pool is thinner, consequently they discount to close fast.

Treat classified asking prices as an opening position rather than a value. Negotiated settlements in this segment typically land 5–10% below the listed figure once the buyer inspects the handset, therefore a Rs. 68,000 listing frequently transacts somewhere around Rs. 62,000–64,000. Caution runs the other way too: anything advertised far below Rs. 55,000 usually signals a non-PTA IMEI, a replaced third-party display or a swapped battery, and each of those adds cost after the sale rather than before it.

Why the price collapsed from Rs. 130,000 to Rs. 62,000

The Redmi Note 13 Pro Plus price in Pakistan fell this far because three forces compounded. Two successor generations reset what buyers expect from the Note line, rupee-denominated launch pricing on newer mid-rangers re-anchored reference points across the segment, and 2024 silicon no longer carries a software-support premium now that its remaining update runway is short.

Period Typical market price (PKR) Value retained vs launch
Launch, 2024 Above 130,000 (top variant, new) 100%
Late 2024 Not stated Not stated
Mid 2025 Not stated Not stated
Early 2026 Not stated Not stated
November 2026 ~62,000 (12GB/512GB, excellent used) Under half

Successor pressure is the dominant mechanism. Each new Note generation drags the previous model’s resale value down because buyers anchor their sense of “normal” to the newest spec sheet on the shelf, resulting in the steepest declines during the six to twelve months after a replacement lands. The effect compounds across two generations, which is why a phone that cost more than Rs. 130,000 new now sits at under half that figure.

Here is a position worth taking: depreciation on this specific model is flattening. The buyers still shopping for it are value hunters drawn to IP68 sealing and 120W charging rather than spec-chasers tracking benchmark scores, and that demand profile does not evaporate when a newer phone launches. Consequently, the Rs. 55,000–62,000 band behaves like a practical floor for PTA-approved 12GB/512GB units through 2027 — with one caveat, which is that battery-replacement costs on ageing cells can pull individual units below it.

HyperOS 3 on the Note 13 Pro+: what the Android 16 update actually changed

The Redmi Note 13 Pro+ 5G received HyperOS 3, built on Android 16, during Xiaomi’s 2026 global rollout, therefore a used unit bought today runs the company’s current interface rather than a two-generation-old ROM. That is the single strongest argument for the device at Rs. 62,000: many rival 2024 mid-rangers have already been dropped from major-version support, which means they are stuck on older Android bases while this one is not.

What HyperOS 3 adds on the Note 13 Pro+ 5G

  • Android 16 base with the current HyperOS security and permission model
  • HyperIsland live-activity area around the camera cutout
  • Redesigned system UI, new home screen layouts and reworked animations
  • System-level Google Gemini assistant integration
  • Generative AI text and image tools (cloud-assisted subset)
  • Faster handoff to Xiaomi tablets, wearables and smart home devices
  • Tighter per-app privacy and permission controls
  • System app optimisation that reduces background memory use

HyperIsland, the new UI layer and system animations

HyperIsland is Xiaomi’s dynamic live-activity area around the camera cutout that surfaces calls, timers, voice recordings, navigation and media playback at a glance. Alongside it, HyperOS 3 brings a revamped system UI, new home screen layouts and reworked animations. The animation work matters disproportionately on this handset because the Dimensity 7200-Ultra has rendering headroom the 2024 ROM never fully used, resulting in a device that feels newer after the update rather than slower.

Gemini and on-device AI tools

The headline AI change is deeper system-level integration with Google’s Gemini assistant, plus the generative text and image tools Xiaomi folded into HyperOS 3. For a Pakistani user the practical gain is assistant access from the system layer and editing tools that run against cloud models. Be realistic about the ceiling: heavier on-device AI processing is reserved for newer flagship silicon, which means the Note 13 Pro+ receives the cloud-assisted subset rather than the full feature set.

Ecosystem handoff and privacy controls

HyperOS 3 adds faster device-to-device handoff across Xiaomi tablets, wearables and smart home gear, together with tightened per-app privacy permissions. The practical limit in Pakistan is ownership: handoff delivers value only if you already run other Xiaomi hardware, so for a single-device household the privacy controls are the more meaningful half of the change. The underlying tension — proprietary ecosystems versus interoperable ones — is the same debate we examine in our analysis of how open standards shape device interoperability.

The complaints: missing AOD animations and post-update battery drain

The update has drawn criticism as well as praise, and reporting only the praise would be dishonest. Community discussion on Reddit’s r/HyperOS has described lockscreen-to-Always-On-Display clock animations being removed or behaving incorrectly in certain regional global ROMs, including the Indian variant. Separately, users report elevated battery drain in the days immediately after installing. The likely driver is post-update media re-indexing and app re-optimisation rather than the ROM itself, so the fix is patience: allow 48–72 hours of normal use, then open Battery usage and look for a single misbehaving app.

How to install HyperOS 3 (step by step)

The update arrives over the air in staged batches, and incremental patches such as build 3.0.301.0 run about 0.91 GB — large enough that Wi-Fi and a charged battery are not optional, because an interrupted flash on a three-year-old cell risks a failed install.

  1. Back up photos, chats and documents to cloud or PC before starting
  2. Connect to Wi-Fi and charge the phone above 50%
  3. Open Settings, then About phone, then tap the HyperOS version banner
  4. Tap Check for updates and wait for the server response
  5. Download the package — incremental patches such as build 3.0.301.0 run about 0.91 GB
  6. Tap Update now and let the device reboot without interruption
  7. Allow 48–72 hours of normal use for re-indexing before judging battery life
  8. If the update is not offered, confirm the device region matches the ROM and re-check after the staged rollout reaches your batch

Why NFC still matters in Pakistan in 2026

Yes, the Redmi Note 13 Pro+ 5G has NFC, and in 2026 that hardware is genuinely useful in Pakistan rather than decorative. The reversal has a clear cause: contactless point-of-sale deployment expanded under the State Bank of Pakistan’s digital financial inclusion push, resulting in tap-to-pay acceptance at urban grocery, fuel and café terminals that simply did not exist when this phone launched.

From dead spec to daily utility: the POS build-out

For years, reviewers in this market dismissed NFC as a checkbox because the acceptance infrastructure was missing — a phone could tap, but almost no terminal would answer. That changed because regulator-driven digital payment growth and card-network contactless requirements pushed merchant terminals toward NFC-capable hardware, which means modern POS machines in urban centres now read a phone as readily as a card. The practical effect is that a mid-range phone with NFC can replace a physical debit card for routine spending in Karachi, Lahore and Islamabad. For readers tracking this shift across devices, our device and connectivity analysis follows the same thread.

JazzCash Tap-to-Pay and NayaPay contactless on this phone

The wallets that matter locally work here. JazzCash Tap-to-Pay and NayaPay contactless payments both gained significant traction across 2025 and 2026, and both run on the handset’s NFC chip. The mechanics protect the card: the wallet provisions a tokenised card credential to the phone’s secure element, therefore the terminal receives a token rather than your real card number. Setup is short — install the wallet, complete identity verification, provision the card, then set the wallet as the default tap-and-pay app under Settings > Connection & sharing > NFC, and hold the upper back of the phone against the terminal. On HyperOS 3, the tightened permission model prompts for payment-default confirmation on first use.

Contactless payment and tag uses that work on the Note 13 Pro+ 5G in Pakistan

  • JazzCash Tap-to-Pay at NFC-enabled merchant terminals
  • NayaPay contactless card payments via tokenised provisioning
  • Google Wallet tap-to-pay where the card issuer supports provisioning
  • Bank wallet apps that issue tokenised debit or credit cards to the secure element
  • NFC tag reading and writing for automation shortcuts and Wi-Fi sharing
  • Peer device pairing with NFC-equipped speakers, earbuds and smart home accessories

What NFC still cannot do here

The limits are real. Public transit ticketing support is inconsistent outside pilot routes, so a phone tap will not reliably replace a transit card nationwide. Many smaller-city and rural merchants still run terminals without contactless support, which means coverage thins sharply outside major urban centres. Bank-side provisioning support also varies by issuer, so whether your specific debit card can be tokenised depends on your bank rather than on the phone. And transactions above a threshold still trigger PIN entry at the terminal. NFC on this device is therefore a convenience upgrade in cities, not a full card replacement across Pakistan.

The hardware three years on: Dimensity 7200-Ultra, 200MP OIS, IP68 and 120W

The hardware remains the reason to buy this phone. The MediaTek Dimensity 7200-Ultra still clears 2026 social, streaming and mainstream gaming workloads without visible strain, which means the practical ceiling is thermal sustain across long sessions rather than raw speed. Buyers who game for twenty minutes at a time will not notice the difference; buyers who game for two hours will.

Specification Detail
Chipset MediaTek Dimensity 7200-Ultra
Display Curved OLED panel
Main camera 200MP with OIS
Front camera Not stated
Battery 5,000mAh
Charging 120W HyperCharge, full in about 19 minutes
Durability rating IP68 dust and water resistance
RAM / storage variants Up to 12GB RAM / 512GB storage
Connectivity 5G, NFC, Wi-Fi
Launch / current software Launched on HyperOS; now HyperOS 3 on Android 16

The 200MP OIS main sensor deserves an honest assessment: daylight detail is strong and pixel-binned low-light output is usable, while the ultrawide is noticeably weaker and there is no telephoto, so distant subjects rely on digital crops. IP68 sealing, meanwhile, matters disproportionately in this price band. Monsoon humidity, rain and dust are what kill cheap phones in Pakistan, therefore a certified seal is an ownership-cost advantage rather than a brochure line — it reduces the probability of the single failure that ends a budget handset’s life.

Charging is the standout figure: 120W HyperCharge fills the 5,000mAh cell in roughly 19 minutes with the bundled adapter. Qualify that for a used purchase, though. A three-year-old cell has lost measurable capacity, consequently the real benefit today is that extremely fast charging masks degraded endurance rather than delivering all-day stamina. Budget for a replacement battery as a planning item, and use the timed charge test in the inspection checklist below to work out how much headroom is left.

Buying used: PTA approval, IMEI checks and battery health

Verify PTA approval before any money changes hands, because an unapproved IMEI loses cellular service on Pakistani networks after the grace window. That single risk dominates all others, and the arithmetic is unforgiving: the discount offered on a non-PTA unit is frequently smaller than the registration tax you will owe to make it usable, which means the “cheap” phone ends up costing more.

Verification is mechanical. Dial *#06# on the handset itself to display the IMEI on screen, then check that number against the PTA DIRBS portal or the SMS verification service. Read the IMEI from the device, never from the retail box, because printed box labels are trivially swapped and a mismatched box is the oldest trick in this market.

Three condition risks are specific to this model. The curved OLED panel is expensive to replace, so edge pressure marks, green tint and dead touch zones all carry real repair costs. Any third-party repair voids the IP68 seal, therefore an opened device no longer offers the water resistance you are paying a premium for. And three years of 120W charging accelerates cell wear, which is why battery health deserves a timed charge test rather than a glance at a settings screen.

Seven-point inspection checklist for a used Redmi Note 13 Pro+ 5G

  1. Dial *#06# on the handset and record the IMEI shown on screen, not the box
  2. Verify that IMEI on the PTA DIRBS portal and confirm the status reads approved
  3. Confirm the HyperOS version in Settings > About phone shows a HyperOS 3 build, which indicates the device is genuine and still receiving updates
  4. Run a timed charge test: measure the percentage gained in 15 minutes on the original 120W charger and compare against the roughly 19-minute full-charge benchmark
  5. Inspect the curved OLED edges under bright light for pressure marks, green tint or touch dead zones
  6. Ask directly whether the device has been opened or screen-replaced, because any repair voids the IP68 seal
  7. Test NFC with a wallet app or NFC tag, test both SIM slots on a 5G network, and check all cameras including the ultrawide before paying

Note 13 Pro+ vs the alternatives at Rs. 60,000-70,000

At this budget, nothing sold new pairs IP68 with 120W charging and a 200MP OIS camera, therefore the Note 13 Pro+ wins decisively on hardware — while new phones in the same band win on warranty cover and battery age. That is the entire trade-off, and which side you take depends on your tolerance for risk rather than on your taste in spec sheets.

Device Price (PKR) Chipset NFC Charging Water rating New or used
Redmi Note 13 Pro+ 5G (12GB/512GB) ~62,000 Dimensity 7200-Ultra Yes 120W IP68 Used
Redmi Note 13 Pro (8GB/256GB) Not stated Not stated Not stated 67W Lower than IP68 Used
Redmi Note 14 Pro+ 5G Above this band Not stated Yes Not stated Not stated New or used
Infinix / Tecno new mid-ranger ~60,000–70,000 2025-tier silicon Varies by model Not stated No IP68 New
Samsung Galaxy A-series entry model ~60,000–70,000 Not stated Varies by model Not stated Not stated New

Read the table as a set of concessions. The standard Note 13 Pro costs less but drops to 67W charging and a weaker water-resistance rating, which means you give up two of the Pro+’s three durability advantages to save money. The Note 14 Pro+ costs more and buys a longer remaining update runway, so it suits owners who keep phones for four years. New budget phones at Rs. 60,000–70,000 deliver warranty coverage and an untouched battery, but they do so on 2025-tier silicon without IP68 sealing.

The position this table supports: buyers who prioritise durability and charging speed should take the used Note 13 Pro+ at Rs. 62,000 and spend the savings on verification. Buyers who cannot tolerate an out-of-warranty device with a three-year-old battery should spend the same money on new stock and accept slower hardware, because peace of mind is a legitimate thing to buy.

Verdict: who should buy it at Rs. 62,000 and who should not

Buy it at Rs. 62,000 if the IMEI clears PTA verification and the battery passes a timed charge test, because no new phone at that price pairs IP68 sealing, 120W charging and a 200MP OIS camera with current Android 16 software. The hardware-per-rupee case is the strongest in Pakistan’s used market right now, and HyperOS 3 removes the usual objection that a 2024 phone is running abandoned software.

One disqualifier changes the answer entirely. If the seller cannot show PTA approval, or the charge test comes back poor, the effective price rises by registration tax or a battery replacement, which means the deal stops being a deal once the all-in figure passes roughly Rs. 68,000. At that point the money is better spent on new, in-warranty stock.

Buy it or skip it

  • Buy: you want flagship-grade durability and charging on a Rs. 62,000 budget
  • Buy: you plan to use JazzCash Tap-to-Pay or a tokenised bank card and need NFC
  • Buy: you are comfortable verifying IMEI, PTA status and battery health yourself
  • Skip: you need an in-warranty device with a fresh battery
  • Skip: you expect four more years of major Android upgrades
  • Skip: you depend on telephoto photography or sustained heavy gaming

Frequently asked questions

What is the Redmi Note 13 Pro+ 5G price in Pakistan in November 2026?

The Redmi Note 13 Pro Plus price in Pakistan is about Rs. 62,000 for a 12GB/512GB unit in excellent condition. Slightly used and box-packed PTA-approved stock lists between Rs. 68,000 and Rs. 99,000 depending on city and condition. The phone is no longer sold new through official Xiaomi channels in Pakistan, so the market is effectively second-hand and dealer inventory.

Did the Redmi Note 13 Pro+ 5G get HyperOS 3?

Yes. HyperOS 3, based on Android 16, reached the device during Xiaomi’s 2026 global rollout, bringing HyperIsland, a redesigned system UI and Gemini integration. Incremental patches such as build 3.0.301.0 run about 0.91 GB and arrive in staged batches, which means availability varies by region and ROM rather than landing on every handset at once.

Does the Redmi Note 13 Pro+ 5G support NFC payments in Pakistan?

Yes. The phone’s NFC chip supports tokenised contactless payments, therefore JazzCash Tap-to-Pay, NayaPay contactless and issuer-supported wallet cards work at NFC-enabled POS terminals. Acceptance is strongest in Karachi, Lahore and Islamabad because terminal upgrades concentrated there first. Transit ticketing support remains limited outside pilot routes.

Why has the Redmi Note 13 Pro+ 5G lost so much value?

Because two successor generations reset the mid-range segment. Each Note launch re-anchors what buyers expect for their money, resulting in a fall from a launch bracket above Rs. 130,000 in 2024 to roughly Rs. 62,000 by November 2026 — more than half the original value in under three years, with the steepest drops following each successor release.

Is the Redmi Note 13 Pro+ 5G still worth buying in 2026?

Yes at Rs. 62,000, provided the IMEI is PTA approved and the battery passes a charge test. The Dimensity 7200-Ultra, 200MP OIS camera, IP68 rating and 120W charging beat anything sold new at the price. The trade-offs are no warranty, a three-year-old battery and a shorter remaining update runway than a current-generation phone.

How long will the Redmi Note 13 Pro+ 5G keep getting updates?

HyperOS 3 on Android 16 is likely the device’s final major Android upgrade under Xiaomi’s mid-range support window, therefore remaining support is primarily security patching rather than new features. Treat the phone as a two-to-three-year device from purchase, and check Xiaomi’s official update policy page for the model’s stated support end date before buying.

How do I check if a used Redmi Note 13 Pro+ is PTA approved?

Dial *#06# on the handset to display the IMEI, then verify that number on the PTA DIRBS portal. The IMEI must be read from the device rather than the box, because printed labels are swapped easily. An unapproved IMEI loses cellular service on Pakistani networks after the grace period, which makes verification non-negotiable before payment.

What is HyperIsland in HyperOS 3?

HyperIsland is Xiaomi’s dynamic live-activity area around the camera cutout that surfaces calls, timers, recordings, navigation and media playback without opening an app. It is managed from Settings, and it works on the Note 13 Pro+ because the HyperOS 3 update ported the feature to supported mid-range hardware rather than restricting it to flagships.

Does HyperOS 3 drain the battery on the Note 13 Pro+?

Some users report elevated drain immediately after installing, driven by media re-indexing and app re-optimisation rather than the update itself. Wait 48–72 hours of normal use, then check Battery usage for a single misbehaving app. On a three-year-old cell, degraded capacity is frequently mistaken for an update problem when the hardware is the cause.

How fast does the Redmi Note 13 Pro+ 5G charge?

120W HyperCharge fills the 5,000mAh battery in roughly 19 minutes with the bundled charger. A used unit charges more slowly as the cell ages, and the phone throttles charging speed when hot, which means real-world times on a three-year-old device run longer than the launch figure. Always use the original adapter and cable.

Limitations of this pricing analysis and when to choose something else

Every figure in this article reflects asking prices observed on OLX Pakistan and local retailer listings between 10 and 16 November 2026, not audited transaction data. Actual sale prices therefore vary by negotiation and move weekly, which is why each number here is dated. Classified listings are also self-reported: condition claims, storage claims and PTA status claims all require independent verification by the buyer, because the seller’s description carries no enforcement behind it. Where the research did not support a figure — including historical mid-curve depreciation prices and some competitor specifications — the tables above read “Not stated” rather than offering an estimate.

HyperOS 3 behaviour differs by regional ROM and build number, so a feature present on one unit may be absent or behave differently on another. The missing Always-On-Display animation reports and the post-update battery drain complaints are community observations from forums including Reddit’s r/HyperOS, not vendor-confirmed defects, and Xiaomi has not published a fix note for either.

5 Critical AI Governance Challenges in Multi-Institution Research Labs – theverge.pk

Honest alternatives exist. A new in-warranty mid-ranger at the same Rs. 60,000–70,000 price suits buyers who need warranty cover and a fresh battery more than they need IP68. The standard Redmi Note 13 Pro suits buyers willing to accept 67W charging and a weaker water rating to spend less. The Redmi Note 14 Pro+ 5G suits buyers who need a longer remaining update runway. And a certified-refurbished unit from a dealer offering a written warranty suits anyone unwilling to run the inspection checklist themselves, because paying a refurbisher to carry the risk is a rational trade.

Conclusion

The Redmi Note 13 Pro Plus price in Pakistan has settled at roughly Rs. 62,000 for a clean 12GB/512GB unit in November 2026, and that number is the whole story: a phone that commanded more than Rs. 130,000 new in 2024 now sells for entry-level money because two successor generations reset the segment beneath it. What makes this particular depreciation curve interesting rather than merely steep is that the device did not stop improving. HyperOS 3 on Android 16 brought HyperIsland, Gemini integration and system app optimisation, which means the software is current rather than abandoned. NFC, long dismissed here as a useless spec, now drives real tap-to-pay transactions through JazzCash Tap-to-Pay and NayaPay as contactless terminals spread across urban Pakistan.

The hardware — Dimensity 7200-Ultra, 200MP OIS, IP68, 120W HyperCharge on a 5,000mAh cell — still outclasses anything new at this budget. The risk sits entirely in the transaction, not the product. Verify the IMEI with *#06#, confirm PTA approval on DIRBS, and run a timed charge test before paying. Clear those three checks and this is among the strongest hardware-per-rupee buys available in Pakistan right now. Read more analysis of local device pricing and connectivity on The Verge PK.

References

Share This Article
Leave a Comment

Leave a Reply

Your email address will not be published. Required fields are marked *